免费毛片网站在线观看,免费一看一级毛片,国产高清一级毛片,一级毛片在线免费视频

Introduction to the working principle of linear guides
發(fā)布日期:2021/7/6 14:06:55 點(diǎn)擊數(shù):265新聞來源:
There is no intermediate medium between the moving element and the fixed element of the linear guide rail, but a rolling steel ball. Because the rolling steel ball is suitable for high-speed motion, has a small friction coefficient and high sensitivity, it can meet the working requirements of moving parts, such as the tool holder and carriage of the machine tool. The basic function of the fixed element (guide rail) of the linear guide system is like a bearing ring, and the bracket for mounting the steel ball is shaped like a "v". The bracket wraps the top and both sides of the rail. In order to support the working parts of the machine tool, a set of linear guide has at least four supports. Used to support large working parts, the number of brackets can be more than four.
???? The diameter tolerance of the steel ball is ±20 microns in increments of 0.5 microns. The steel balls are screened and sorted and installed on the guide rails. The size of the preload depends on the force acting on the steel balls. If the force acting on the steel ball is too large, the steel ball will withstand the preload for too long, which will increase the movement resistance of the bracket. There is a balance problem here; in order to improve the sensitivity of the system and reduce the movement resistance, the preload must be reduced accordingly, and in order to improve the movement accuracy and the retention of the precision, it is required to have sufficient preload negative numbers, which are contradictory two. aspect.
下一個(gè):The cross section of linear gu...